Beverage Filling Machinery, Biscuit Production Line, Water Treatment Equipment Manufacturer in China
Home » Products
    1. Silica Sand Filter
      Silica sand filter, also known as mechanical filter, is a kind of water filtration equipment mainly used to remove the granular impurities, suspended solids, colloids, and other substances in water. ...
    1. Active Carbon Filter
      Active carbon filter is a kind of water treatment equipment that utilizes the adsorption of active carbon to purify water. The husk activated carbon inside the stainless steel filter can absorb the ...
    1. Sodium Ion-Exchanger
      The sodium ion-exchanger makes the sodium ion in ion exchange resin exchange with calcium ion and magnesium ion in water, effectively avoiding the generation of carbonate scale and sulfate ...
    1. Precision Filter
      Precision filter is a kind of water filtration equipment used to prevent impurities from entering high pressure pump and reverse osmosis membrane module. The filtration precision is 0.10μm to 60μm ...
    1. Ultrafiltration Water Filter
      Ultrafiltration water filter is a kind of water purification equipment which utilizes ultrafiltration technology to purify water. It is different from other water purification equipment in that ultrafiltration ...
    1. Reverse Osmosis
      The RO membrane in reverse osmosis device is the spiral-wound polyamide composite membrane made by Hydranautics. The average desalination rate of a single membrane is over 98% ...
    1. Ozone Mixing Tank
      Ozone mixing tank is a kind of water treatment equipment that can make water and ozone mixed together fully, thus achieving the goals of sterilization, retaining freshness and preventing secondary pollution. ...
    1. Water Tank
      Water tank is furnished with air respirator, sanitary manhole and liquid indicator, etc. This water treatment equipment is made of stainless steel 316 or 304. Its internal surface is processed through polished treatment technology and the surface roughness is . ...
    1. PET Injection Molding Machine
      With increased ejector force and ejector stroke, this injection molding machine can meet various production requirements of PET perform
    1. Dehumidifier
      By condensing moisture onto a cold surface, a dehumidifier can takes moisture out of the air. The hot and cold coils are in the same box in the dehumidifier. Humid air, which is drawn into the dehumidifier by a fan, goes through the cold coil and is ...
    1. Plastic Grinder

      Plastic grinder should be placed in a ventilated place, so that the work calories of motor can give out timely. This will prolong the service life of plastic grinder. ...

    1. Plastic Mixer
      Plastic mixer is mainly used to mix and stain vinyl chloride resin, stain and dry polypropylene grain, dry ABS and other hygroscopic resins before they are processed, and mix phenolic resins, etc.
    1. Plastic Feeder

      Our plastic feeder adopts stainless steel hopper. The parts in directly contact with feed materials are made from stainless steel, aluminum or wear and corrosion resistant materials.
      ...

    1. Cold Water Tank

      Cold water tank can be used in air conditioning fields, refrigeration industry, dyeing industry, and other fields where cooling function is needed. Its super low running noise makes it quite suitable for use in noise control areas.

    1. Air-Cooled Water Chiller

      Our air-cooled water chiller adopts the original compressor from Europe, America or Japan. The compressor features low running noise, low power consumption and long service life. ...

    1. Automatic Bottle Blow Molding Machine
      1. The automatic bottle blow molding machine adopts sliding rail style wheel to convey the preform, ensuring the high position accuracy and the stable conveying ...
    1. Semi-Automatic Bottle Blow Molding Machine
      Semi-automatic bottle blow molding machine can be used to make plastic water bottles, medicine bottles, oil bottles, cosmetics bottles, heat resistant bottles, wide mouth bottles, and so on. ...
    1. Juice, Tea Filling Machine
      1. The components of our juice, tea filling machine, which are in direct contact with the liquid and other materials are made of stainless steel which meets sanitary requirement. Especially, the filling valve adopts 316 stainless steel ...
    1. Carbonated Drink Filling Machine
      Direct connection technology is adopted between air conveyor and bottle-feeding star wheel of carbonated drink filling machine, and there is bottle feeding screw and conveying chain....
    1. Bottled Water Production Line
      The bottled water production line is of high efficiency and reliability. Bottle neck clamping technology is adopted for bottle conveying. While changing the bottle shape, users only need to replace ...
    1. Beverage Can Filling Line
      The outer surface and the parts in direct contact with filling materials of our beverage can filling line are all made of high quality stainless steel, making the filling machine elegant in appearance ...
    1. 5 Gallon Bottled Water Filling Line
      5 gallon bottled water filling line incorporates bottle rinsing, filling and capping into one. It is fully made of high quality stainless steel and thus is resistant to corrosion and easy to clean. ...
    1. Biscuit Production Line
      Biscuit production line is a kind of food production line mainly made up of biscuit molding machine, tunnel heated air circulation electric oven, biscuit oil spray machine, biscuit flat blender, cooling line...
    1. Candy Production Line
      As a professional candy production line supplier in China, P&J International Trading Company can offer various candy manufacturing equipment and packaging equipment. ...
    1. Macaroni Production Line
      Macaroni Production Line utilizes vacuum dough pressing licensed technology in the production of macaroni and Italian Pasta.
      Various flours can be applied to produce high quality macaroni ...
    1. Carbonated Drink Packaging Solution
      Three in one carbonated drink packaging solution incorporates bottle washing, filling and capping into one. This advanced bottling line is developed based on the advanced isobar filling technique and the filling technique requirement of carbonated drinks ...
    1. Hot Drink Filling Packaging Solution
      Direct connection technology is adopted between air conveyor and bottle-feeding star wheel of hot drink filling machine. Bottle-feeding star wheel adopts bottleneck gripper mechanism which has ...
    1. Drinking Water Packaging Solution
      Three in one drinking water packaging solution incorporates bottle washing, filling and capping into one. This advanced bottling line is developed based on the advanced filling technique and the filling ...
    1. 2 Layer Cast Stretch Film Extruder
      The product has been continuously improved according to the merits of similar products at home and abroad. Due to the extrusion through double screws, it runs stably with low noise.
    1. Auxiliary Machinery
      The machine primarily consists of driving mechanism, feeding device, compacting device, transmission system and slitting mechanism.
    1. 2 Layer PE Bubble Film Extruder
      It is characterized by high production efficiency, quality output, rational structural design, stable operation, simple and convenient manipulation, automatic meter counting and other strong points.
    1. 3 Layer PE Bubble Film Extruder
      It realizes the mechanical and electrical integration under the automatic control from material feeding process to the finished film winding.
    1. 3-5 Layer PE Bubble Film Extruder
      Our machine supports the manufacture of 2 or 3 layers of bubble film laminated with 2 layers of other materials. The laminating material includes the aluminum foil film...
    1. Auxiliary Machinery
      The spacing between cutting edges is adjustable so that it is convenient to replace the blades.
      Our machine works with high efficiency but low energy consumption.
    1. Bubble Film Bag Making Machine
      This machine is specially designed for making bags with bubble films. Both sides of the bag are pressed tightly with solid seal through water cooling technology with rapid cooling performance.
    1. Kraft Paper Envelope Making Machine
      This machine uses advanced motion control technology and all the processes from sheet materials feeding to cutting and molding are controlled by computer.
    1. Plastic Sheet Extruder
      Its screw and the hopper are made of 38CrMoALA superior alloy steel. After nitriding, these parts become hard, corrosion resistant and long lasting.
    1. Automatic Plastic Cup Thermoforming Machine
      Under the control of microcomputer, the machine offers semi-automatic or automatic performance. In addition, it features wide application, stable operation...
    1. Automatic Plastic Cup Lid Forming Machine
      The pneumatic system of the machine works under the photoelectric control. The PLC enables all the systems of the machine to run accurately without error...
    1. Vacuum Forming Machine
      This product is an efficient machine for molding the plastic sheets, accomplishing the sheet feeding, heating, molding, cooling, mold releasing and cutting at one time.
    1. CIP Cleaning System (Clean-In-Place System)
      CIP cleaning system is the special equipment used for automatic cleaning of beverage production line and beverage filling equipment. There are three procedures in the cleaning system ...
    1. Shrink Packaging Machine
      The shrink packaging machine is specially designed for the full-automatic packaging production line of drinks like beer, purified water, juice and dairy products, etc. It has full-automatic ...
    1. Air Conveyor System
      The air conveyor is installed with air fans equipped over the conveyor. Every fan is installed with an air filter to prevent dust from entering bottles. Bottles are kept in the conveyor by the neck ...
    1. Mixer
      Application:Juice beverage
      Lemonade
      Carbon dioxide mixed drinks ...
    1. Bottle Unscrambler
      LP bottle unscramblers, with the speed of 8,000~36,000 bottles/hour, are the indispensable matching products of high speed filling machines. From feeding of disorderly bottles ...
    1. Conveyor System
      Model: JP18 conveyor system
      Function of conveyor system
      According to different output of production lines ...
    1. Labeling Machine
      It is easy and convenient for adjustment and maintenance and with neat shrinkage. The spraying adopts even distribution by low voltage sub-drum steam and is designed with seamless ...
    1. Drink Pretreatment System
      The drink pretreatment system is pretreatment complete equipment used for hot filling and filling of carbonated drinks. Developed by advanced technology from Europe, the drink treatment system has ...
    1. Automatic Unstacker
      JD automatic unstacker is used for unstacking piles of empty pop cans to form linear distribution. The conveying system of the automatic unstacker is controlled by PLC and also withl ...
P&J International Trading Company is a professional supplier of beverage filling machinery, biscuit production lines and water treatment equipment. We mainly offer water treatment equipment, injection molding machines, bottle blow molding machines, beverage drink filling machines, biscuit production lines, candy production lines, and Macaroni Production Line, etc. These products are of high quality and low price. They are quite popular with our customers in Australia, New Zealand, Mexico, Chile, Costa Rica, and more. We look forward to cooperating with you.